After selecting a chapter in the Table of Contents window, use the Select Questions window to access the questions contained in that chapter. The window contains numbered buttons that represent questions in the chapter. The color of the button indicates the selection status of each question:

• not highlighted = not selected,
• filled with a color = selected for test or section named in window,
• gray = question has been selected but for another section of the test.

When you click on a question’s button in the Select Questions window, the content of that question is displayed in the Edit Questions window.

Before selecting test questions manually:

• a test must be open (if needed, see Creating a New Test or Opening an Existing Test ),
• if desired, test sections must be created (see Using Test Sections ).

To select questions manually:

1. If you have created multiple sections, from the Test menu, choose the section you want to add questions to.
2. Click inside the Select Questions window to make it active or from the Window menu, choose Select Questions.
3. In the Select Questions window, double-click on the button(s) representing the question(s) you want to include in your test. If you want to unselect a question, double-click on the numbered button again.
   You can also double-click on a figure’s button to select questions linked to that figure. The figure button color indicates the selection status of that figure:
   • not highlighted = no questions linked with the figure have been selected,
   • filled with a solid color = some or all of the questions associated with the figure have been selected for the active section named in the window (it is possible to have questions linked to the same figure in more than one section),
   • gray = all questions associated with the figure have been selected for the test, but for another section.
   -or-
   Click the In Test box in the Edit Questions window.
   -or-
   Choose Displayed Question from the Select menu
4. If you want to select questions from another chapter: Click anywhere in the Table of Contents window to make the window active, then click on another chapter number. The information in the Select Questions window will automatically change.
   -or-
   From the Chapter menu, choose from the Next Chapter or Previous Chapter options.
5. If you have created multiple sections, repeat steps 1-4 for all remaining sections.

When finished selecting questions for your test, from the File menu, choose Save Test. Your test will be saved with the name you previously specified.

NOTE: You cannot select questions for a test from two different question banks.